Termékek bulk macska étel (8)

The packaging of pet food is very important, as some pets are much more sensitive to scents than humans. Therefore, we recommend the use of medium- or high-barrier packaging in pet food packaging. We recommend a metalized packaging solution for the food of animals very sensitive to scents. We advice “box pouch” or “doypack” pouches with or without zipper for pouches between 1 kg an 5 kg and also it is more efficent to use “quadro” or “folded bottom” pouches for larger pet foods of 10-30 kg. The laser perforation solution can be optionally offered to enable easy opening of these bags.

30-35% CaO 15-18% MgO

Fluid Col Multi-purpose additive powder, to add to a suitable mixture of binders and aggregates, for the on-site production of mortars, grouts and concretes that are self-levelling, rheoplastic, controlled shrinkage or moderately expansionary, high mechanical strength, chemical and waterproofing. The physical-chemical action of Fluid Col is an interaction of positive contributions and modifications: drastic reduction of the A/C ratio, shrinkage-resistant action, superpozzolanic action and reaction of ultrafine fillers (MICROSIL 90), which transforms unstable, soluble, readily reactive calcium hydroxides into stable, insoluble, chemically and mechanically resistant hydrous calcium silicates. Preparation of mortars, grouts, rheofluid concretes, shrinkage-compensated or moderately expansionary, high mechanical, watertightness and chemical stability performance, for structural slubs, anchoring machines, road joints, etc. Add the product in a concrete mixer, mixer truck or mixer, together with the remaining anhydrous components of the mixture: cement and aggregates, any polypropylene and/or steel fibres, etc. The indicative dosage, depending on the type of conglomerate to be packaged and its purposes, varies between 12% and 15% of the weight of the cement. After a first mixing, add the mix water and mix thoroughly, until you obtain a homogeneous whole and free of lumps. The cement dosage must not be less than 350 kg/m³. Fluid Col is perfectly compatible with the addition of fibre d steel and/or polypropylene fibres READYMESH, for the preparation of conglomerates composite s, fibre reinforced. Add 10 - 15% of Fluid Col to the weight of the cement present in the mixture. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Why peat pellets: Because they are simple, environment-friendly and much cheaper or give much more energy for the same money – if you prefer.Peat pellets are produced from raw peat – a decomposed biomass of wood and herbaceous species. Peat bog is like big sink of compost – millions of tons of biomass has been accumulating there for centuries.Peat is widely used as an energy source in Finland – more than 20% of its energy demand is covered by peat. For years peat has not been regarded as serious fuel source because of its higher production costs compared with coal, oil or natural gas. But increasing energy prices in recent years has changed the outlook for peat – it has even become a cheaper energy resource.Traditionally peat is regarded as a high ash fuel. But it is not true in all cases. The peat we use for pellet production has extremely low ash content which is basically found in Baltic’s and Northwest Russia. Quality:DIN Diameter (mm):6,8,10,14 mm Ash (%):≤ 1.0% max 3% Moisture (%):≤ 12 Packaging:15 kg, 16 kg, 25 kg, 40 kg, Big Bags, Loose Length (mm):3,15 ≤ L ≤ 40 The heat of combustion (MJ / kg):≥ 17,5 Bulk density (kg/m3):≥ 700-750

consumption : The majority of consumption, 61.8%, was for heat generation. Pellet consumption for heating can be further subdivided into three markets: residential heating (69%), commercial heating (19%) and CHP heating (12%). The remaining 38.2% of the wood pellets were used to generate electricity. It should be noted that the technologies for generating energy from pellets for heat, electricity or both are mature and offer efficient and reliable processes.

Sunflower pellets - Oilseed crops

92-96% CaCO3 included min. 50% CaO

Holzpellets 6 mm sind eine bequeme, wirtschaftliche und effiziente Möglichkeit, Ihr Zuhause oder Ihr Unternehmen mit Haushalts- und Naturbrennstoffen zu heizen. Holzpellets der Güteklasse A1 Durchmesser: 6–8 mm Geringer Staubgehalt < 1 % Hoher Ascheschmelzpunkt > 1200 °C Hergestellt aus den besten Urwäldern Hartholz- und Weichholzpellets 6 mm: Hartholz wie Ahorn, Eiche, Birke und Esche. Und wir alle wissen, dass wir Nadelhölzer wie Kiefern, Tannen und Fichten verwenden. Kaufen Sie Holzpellets 6mm. Verbrauch europäischer Holzpellets: Der größte Teil des Verbrauchs entfällt auf die Wärmeerzeugung – 61,8 %. Der Verbrauch von Pellets zur Wärmeerzeugung lässt sich weiter in drei Märkte unterteilen: Wohnraumheizung (69 %), gewerbliche Heizung (19 %) und Wärme aus Kraft-Wärme-Kopplung (12 %). Die restlichen 38,2 % der Holzpellets wurden zur Energieerzeugung genutzt. Es ist zu beachten, dass Technologien zur Energieerzeugung aus Pellets für Wärme, Strom oder beides ausgereift Durchmesser:6–8 mm